IC-2330A - Dual Band 2m/220 MHz FM Transceiver

GENERAL

• Frequency Coverage:

  144 MHz:

  Tx: 144-148 MHz

  Rx: 118-174 MHz (guaranteed range: 144-148 MHz)

  220 MHz:

  Tx: 222-225 MHz

  Rx: 222-225 MHz

• Tuning step increment: 5, 10, 12.5, 15, 20, 25 kHz, 1 MHz or 10 MHz
• Frequency stability: ±10 ppm (-10°C to +60°C; +14°F to +144°F)
• Number of memory channels (144 MHz and 220 MHz):

  15 memory channels

  1 call channel

  2 scan edge channels

• Mode: FM (F3)
• Antenna Impedance: 50 ohms (nominal)
• Power Supply Requirement: 13.8 V DC+/-15% (negative ground)
• Current Drain (at 13.8 V DC):

  144 MHz:

  Transmit: 10.5 A (high); 5.5 A (mid); 4.0 A (low)

  Receive: 1.2 A (squelched); 1.8 A (max. audio output)

  220 MHz:

  Transmit: 7.5 A (high); 6.0 A (mid); 4.5 A (low)

  Receive: 1.2 A (squelched); 1.8 A (max. audio output)

• Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
• Dimensions (projections not included): 140(W) x 40(H) x 165(D) mm, 5.5(W) x 1.6(H) x 6.5 (D) in
• Weight: 1.25 kg; 2.8 lb.

TRANSMITTER

• Output Power:

  144 MHz: 45 W (high); 10 W (mid); 5 W (low)

  220 MHz: 25 W (high); 10 W (mid); 5 W (low)

• Modulation System: Variable reactance frequency modulation
  
• Max. Frequency Deviation: ±5.0 kHz
• Spurious Emissions: Less than -60 dB
• Microphone Impedance: 600 ohms

RECEIVER

• Receive System: Double conversion superheterodyne
• Intermediate Frequencies:

  144 MHz: 1st 17.2 MHz; 2nd 455 kHz

  220 MHz: 1st 21.8 MHz; 2nd 455 kHz

• Sensitivity: Less than 0.16 µV for 12 dB SINAD
• Spurious and Image Rejection Ratio: More than 60 dB
• Audio Output Power: More than 2.4 W at 10% distortion with an 8 ohms load.
• Audio Output Impedance: 8 ohms

INTERNAL UNITS

• UT-55 DTMF ENCODER/DECODER UNIT: Provides remote control operation with the HM-56A HAND MICROPHONE or another transceiver with a DTMF encoder. Also provides pager and code squelch functions with DTMF codes.
• UT-66 VOICE SYNTHESIZER UNIT: Provides voice announcement of operating frequency.
• UT-67 TONE SQUELCH UNIT: Provides pocket beep and tone squelch functions and ensures quiet stand-by. Can also be used as a sub audible tone encoder.

DC POWER SUPPLY AND CABLES

• IC-PS30 DC POWER SUPPLY: Output voltage=13.8 V; Max. current drain= 25 A. Equipped with 3 output connectors.
• OPC-044B DC POWER CABLE: Same type as supplied with the transceiver.

MICROPHONES

• HM-56A HAND MICROPHONE: Equipped with 14 DTMF memory channels for auto dialing. Same type as supplied with the transceiver.
• HS-15 FLEXIBLE MOBILE MICROPHONE: For all-around mobile operations. Used with the HS-15SB.
• HS-15SB SWITCHBOX: Transmit/receive switch for use with the HS-15.
• SM-6 DESKTOP MICROPHONE: Easy-to-use goose-neck microphone. Suitable for base station operation.
• SM-8 DESKTOP MICROPHONE: Up/down switches are included. Can be used with up to 2 Icom transceivers.

EXTERNAL SPEAKERS

• SP-7 EXTERNAL SPEAKER: Suitable for base station operation. Input impedance= 8 ohms; Max. input power= 5W.
• SP-10 EXTERNAL SPEAKER: Provides excellent audio in your vehicle. Input impedance= 8 ohms; Max. input power= 5W.
• SP-12 EXTERNAL SPEAKER: Slim-type speaker for mobile operation. Easily installed on a sun visor, dashboard, etc.

OTHER OPTIONS

• MB-27 MOBILE MOUNTING BRACKET: Same type as supplied with the transceiver.
• MB-34 JOINT PLATES: Stack the IC-2330A and IC-449A or IC-1201A.