IC-38A - Mobile 220 MHz FM Amateur Transceiver |
|
Quick Specs:
220 MHz single band mobile transceiver
RX: 215-230 MHz
TX: 220-225 MHz
Output power: 25 W
Modes: FM
Receiver sensitivity: 0.18 µV (FM, 12 dB SINAD)
CTCSS encode standard, CTCSS decode (tone squelch) optional |
|
Detailed Specifications:
GENERAL
- Frequency Coverage:
- Tx: 220-225 MHz
- Rx: 215-230 MHz
- Antenna impedance: 50 ohms
- Frequency stability: ±10 ppm (-10°C to +60°C)
- Number of memory channels: 21
- Scan: Full-scan, memory channel-scan
- Frequency resolution: FM: 5 kHz, 10 kHz, 15 kHz, 20 kHz, 25 kHz
- Power supply: 13.8 V DC ±15%
- Polarity: Negative ground
- Current Drain:
- Standby: 450 mA
- AF Max. Power: 800 mA
- TX High: 6.5 A
- TX Low: 3.0 A
- Usable Temperature Range: -10°C to +60°C; +14°F to +140°F.
- Dimensions: 5.5(W) x 2.0(H) x 6.1(D) in
- Weight: 2.6 lbs.
Transmitter
- Output power:
- Modulation: FM: Variable reactance modulation
- Spurious emissions: -60 dB
- Maximum frequency deviation: ±5.0 kHz
- Microphone impedance: 600 ohm electret
- Operating mode: Simplex and duplex
- Subaudible tones: 32 tones built-in
Receiver
- Receive system: FM: Double conversion superheterodyne
- Intermediate frequencies: FM: 17.2 MHz; 455 kHz
- Sensitivity: FM 12 dB SINAD: -15 dBµ (0.18 µV)
- Squelch sensitivity: FM threshold: -19 dBµ (0.11 µV)
- Selectivity: FM 12.5 kHz/6 dB; 25.0 kHz/60 dB
- Spurious and image rejection: 60 dB
- Audio output: 2.4 W (8 ohms at 10% distortion)
- Audio output impedance: 4-8 ohms
|
|
|
|