IC-Z1A - Dual Band 2m/440 MHz Handheld Transceiver

Quick Specs:
Dual band 2 meter and 440 MHz handheld transceiver with detachable control head
RX: 136-174 MHz, 400-470 MHz
TX: 144-148 MHz; 440-450 MHz
Output power: 5 W VHF; 5 W UHF
Modes: FM
Receiver sensitivity: 0.16 µV (FM, 12 dB SINAD)
CTCSS encode standard, CTCSS decode (tone squelch) optional

GENERAL

• Frequency Coverage:

  VHF:

  Tx: 144-148 MHz

  Rx: 136-174 MHz (guaranteed 144-148)

  UHF:

  Tx: 440-450 MHz

  Rx: 400-470 MHz (guaranteed 430-440)

• Mode: FM (F3E)
• Acceptable power supply: 4.5 to 16 V DC
• Number of memory channels: 104 (92 regular, 12 scan edges)
• Tuning steps (kHz): 5, 10, 12.5, 15, 20, 25, 30 and 50
• Dial select steps: 100 kHz or 1 MHz
• Current Drain (at 13.5 V, typical values):

  VHF:

  Tx (high): 1.3 A; Tx (low): 500 mA

  1 band Rx (rated audio): 160 mA; 1 band Rx (power saved): 23 mA (avg.)

  2 bands Rx (rated audio): 210 mA; 2 bands Rx (power saved): 34 mA (avg.)

  UHF:

  Tx (high): 1.5 A, Tx (low): 600 mA

  1 band Rx (rated audio): 170 mA; 1 band Rx (power saved): 25 mA (avg.)

  2 bands Rx (rated audio): 210 mA; 2 bands Rx (power saved): 34 mA (avg.)

• Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
• Dimensions (with BP-171): 57(W) x 125(H) x 36(D) mm, 2.2(W) x 4.9(H) x 1.4(D) in
• Weight (incl.BP-171 + antenna): 380 g; 13.4 oz.

Transmitter

• Output power (at 13.5 V): 5 W, 0.5 W or 15 mW
• Modulation system: Variable reactance frequency modulation
• Maximum frequency deviation: ±5 kHz
• Spurious emissions: Less than -60 dB
• Microphone impedance: 2000 ohms

Receiver

• Receive system: Double conversion superheterodyne
• IF:

  VHF: 1st 43.1 MHz; 2nd 455 kHz

  UHF: 1st 35.8 MHz; 2nd 455 kHz

• Sensitivity (for 12 dB SINAD; typical): Less than 0.16 µV (Less than 0.32 µV for V/V and U/U)
• Squelch sensitivity (at threshold): Less than 0.16 µV
• Selectivity: More than 15 kHz/-6 dB; Less than 30 kHz/-60 dB
• Spurious and image rejection: Less than -60 dB (except 1/2 of image frequency)
• Audio output power (at 13.5 V): More than 180 mW (10% distortion with an 8 ohm load)
• Audio output impedance: 8 ohms

IC-Z1A Options

• BP-170 BATTERY CASE: R6 (AA) batteries x 4
• BP-171 BATTERY PACK: 4.8 V, 700 mAh (approx. output power and operating time = 1.3 W/5 h 30m)
• BP-172 BATTERY PACK: 4.8 V, 950 mAh (approx. output power and operating time = 1.3 W/7 h 50m)
• BP-173 BATTERY PACK: 9.6 V, 650 mAh (approx. output power and operating time = 5 W/3 h 20 m)
• BP-180 BATTERY PACK: 7.2 V, 600 mAh (approx. output power and operating time = 3.5 W/3 h 20 m)
• BC-79 + AD-51 DESKTOP CHARGER and ADAPTER: Rapidly charges battery packs BP-171, BP-172, BP-173 or BP-180. Both AC and DC can be used to power the charger.
• CP-12 CIGARETTE LIGHTER CABLE WITH NOISE FILTER: Allows you to operate the transceiver through a 12 V cigarette lighter socket. The connected battery pack is charged simultaneously (12 to 16 V DC necessary).
• OPC-254 DC POWER CABLE: Allows you to operate the transceiver through a 4.5 to 16 V external DC power supply. The connected battery pack is charged simultaneously (12 to 16 V DC necessary).
• HM-46 SPEAKER-MICROPHONE: Compact, lightweight. Equipped with an earphone jack.
• HM-54 SPEAKER-MICROPHONE: Durable, full-sized.
• HM-75A SPEAKER-MICROPHONE: Allows you to remotely select memory channels, operating frequency, etc.
• HS-85 HEADSET: Allows you hands-free operation. Includes VOX, PTT, "one-touch PTT" (TOT). Low voltage type.
• SP-13 EARPHONE: Provides clear audio in noisy environments.
• UT-93 TONE SQUELCH UNIT: Provides tone squelch, pocket beep and tone scan functions.
• MB-30 MOBILE MOUNTING BRACKET: For mounting the transceiver on the inside door panel of a vehicle.
• BC-74A/E/D or BC-110V WALL CHARGER: Regularly charge battery packs. The same as supplied with some versions.
• LC-123 CARRYING CASE: For use with attached BP-170, BP-171 or BP-172
• LC-124 CARRYING CASE: For use with attached BP-173