Quick Specs: Mobile UHF Transceiver
RX/TX: see detailed specifications
Output power: 25 W
Modes: FM
Receiver sensitivity: 0.2 µV (FM, 12 dB SINAD)
CTCSS standard
DTCS optional (see detailed specifications)
Detailed Specifications
GENERAL
Frequency Coverage:
IC-U220: 450~470 MHz
IC-U220-1: 410~430 MHz
IC-U220-3: 470~490 MHz
IC-U220-4: 490~512 MHz
IC-U220-5: 400~420 MHz
*Ask your Icom Dealer for the permitted frequency range in your area.
Maximum frequency separation: 20 MHz (except for IC-220-4: 22 MHz)
Mode: FM (16K0F3E)
Number of channels: Up to 18
Channel spacing: 25 kHz
Antenna impedance: 50 ohms (unbalanced)
Power Supply Requirement: 13.8 V DC ±15% (negative ground)
Current drain (at 13.8 V DC):
Transmit (high [25 W]): 7.0 A
Transmit (low [5 W]): 4.0 A
Receive (squelched): 500 mA
Receive (max. audio output): 1.1 A
Usable Temperature Range: -30°C to +60°C; -22°F to +140°F
Frequency stability: ±0.0005% (-30°C ~ +60°C)
Dimensions (projections not included): 140(W) x 40(H) x 160(D) mm; 5.5(W) x 1.6(H) x 6.3(D) in
Weight: 1.0 kg; 2.2 lb
TRANSMITTER
Output power:
High: 25 W
Low: 5 W
Max. frequency deviation: ±5.0 kHz
Spurious emissions: -75 dB
Harmonic emissions: -75 dB
Noise and hum: -50 dB
RECEIVER
Sensitivity (for 12 dB SINAD): 0.2 µV
Squelch sensitivity (threshold): 0.2 µV
Adjacent channel selectivity: -80 dB (typical)
Intermodulation rejection: -75 dB (typical)
Spurious response rejection: -85 dB
Noise and hum: -50 dB
Audio output power: 4 W with a 4 ohms load.
IC-U220 Options
Icom offers a variety of options to suit many different operating environments. Some versions cannot use all the options listed below since type approval for the IC-U220 varies between countries. Ask your Icom dealer which options are available.
EM-65 HAND MICROPHONE: Same type as supplied with the IC-U220.
EM-69 HAND MICROPHONE: Stream-lined microphone with a DTMF keyboard. Equipped with 14 DTMF code channels for auto dialing. Up to a 22-digit telephone number can be memorized into each DTMF code channel.
SP-5 EXTERNAL SPEAKER: Can be easily installed in any part of your vehicle. The same type as supplied with the IC-V100. Input impedance: 4 ohms. Max. input power: 5 W
SP-10 EXTERNAL SPEAKER: Compact and easy-to-install. Input impedance: 4 ohms. Max. input power: 5 W
OPC-044B DC POWER CABLE: Same type as supplied with the IC-U220.
UT-64 DTCS ENCODER/DECODER UNIT: Ensures advanced, quiet selective calling and quiet standby with a 3-digit code. Up to 177 codes are programmable.
