Quick Specs Mobile VHF Transceiver
RX/TX: 136-155 MHz or 146-174 MHz (two versions)
Output power: 50 W
Modes: FM
Receiver sensitivity: 0.35 µV (FM, 12 dB SINAD)
CTCSS standard
2-tone optional (see detailed specifications)
Detailed Specifications
GENERAL
Frequency Coverage:
136-155 MHz (Low-band version)
146-174 MHz (High-band version)
Mode: FM (16K0F3E)
Number of memory channels: 16 (Transmit, receive and CTCSS frequencies are programmable)
Channel spacing: 25 kHz
Antenna impedance: 50 ohms (unbalanced)
Power Supply Requirement: 13.8 V DC ±15% (negative ground)
Current drain (at 13.8 V DC):
Transmit: 12.0 A
Receive (squelched): 500 mA
Receive (max. audio power): 1.2 A
Usable Temperature Range: -30°C ~ +60°C; -22°F ~ +140°F
Frequency stability: ±0.0005% (-30°C ~ +60°C)
Dimensions (projections not included):
Both remote controller and main body: 170(W) x 50(H) x 260(D) mm; 6.7(W) x 2.0(H) x 10.2(D) in
Remote controller only: 170(W) x 50(H) x 40(D) mm; 6.7(W) x 2.0(H) x 1.6(D) in
Weight:
Both remote controller and main body: 2.6 kg; 5.7 lb
Remote controller only: 380 g; 13.4 oz
TRANSMITTER
Output power: 50 W
Max. frequency deviation: ±5.0 kHz
Spurious emissions: -70 dB
Harmonic emissions: -70 dB
FM hum and noise: -40 dB
Max. frequency separation:
Low-band version: 8 MHz
High-band version: 26 MHz
RECEIVER
Modulation acceptance: ±7 kHz
Sensitivity (for 12 dB SINAD): 0.35 µV
Squelch sensitivity (threshold): 0.3 µV
Adjacent channel selectivity: -70 dB
Intermodulation rejection: -70 dB
Spurious and image rejection: -80 dB
Audio Output Power: 5 W with a 4 ohms load.
Max. frequency separation:
Low-band version: 8 MHz
High-band version: 26 MHz
IC-V100 Options
CK-12 REMOTE CABLE KIT: Allows you 6 m (19.7 ft) separate installation of your IC-V100 front panel and main body in the vehicle.
HG-10 MICROPHONE HANGER BOX: Provides monitoring when operating with the tone squelch function even if the microphone is left hanging on the microphone hanger.
HM-37 DTMF MICROPHONE: Heavy-duty hand microphone with DTMF keyboard.
HM-38 HAND MICROPHONE: Heavy-duty hand microphone.
IC-PS30 AC POWER SUPPLY: Allows you to use the IC-V100 through AC power source. Equipped with a DC power cable and 3 extra DC output connectors. Output voltage: 13.8 V; Max. current drain: 25 A
SP-5 EXTERNAL SPEAKER: Can be easily installed in any part of your vehicle. The same type as supplied with the IC-V100. Input impedance: 4 ohms. Max. input power: 5 W
SP-10 EXTERNAL SPEAKER: Compact and easy-to-install. Input impedance: 4 ohms. Max. input power: 5 W
UT-26 2-TONE DECODER UNIT: A 2-tone system receives only specific stations and provides a "personalized" squelch.
UT-27 2805 Hz TONE DECODER UNIT: Allows you to receive only specific stations using 2805 Hz tones.
