IC-M11 - Handheld VHF Marine Transceiver |
|
Quick Specs:
Handheld VHF marine transceiver
RX/TX: all USA and international marine channels
Output power: 6 W
Modes: FM
Receiver sensitivity: 0.35 µV (FM, 12 dB SINAD) |
|
Features
Weather resistant
We've designed IC-M11 to withstand tough conditions at sea and on shore. Don't worry about using IC-M11 on deck - IC-M11 is WEATHER RESISTANT. Don't worry about the sun - IC-M11 withstands temperatures up to 60° C. Don't worry about sand penetrating the case - IC-M11 is DUST-TIGHT. Even though IC-M11 is compact, it's built to last the punishment of rugged environments.
All marine channels already programmed
We program ALL the U.S.A. and International marine channels available to marine radio operators into IC-M11 at the factory. IC-M11 is ready-to-operate. No frequency programming necessary! You can use IC-M11 in every port in the world. Write any marine channel into one of the 24 memory channels at the touch of a button. Clear and rewrite memory channels in an instant.
High output power
IC-M11 output power is six watts, more than most handheld marine transceivers provide, and enough to make you heard. For short distance contacts, press the H/L switch on the front panel for one watt output. When you don't need the extra signal strength six watts gives, this handy HIGH/LOW power output selectability can help you save power.
Dual and tri watch
IC-M11 has two watch functions. DUAL WATCH simultaneously monitors emergency channel 16 and a channel of your choice. TRI WATCH is an Icom innovation - unique to the market. TRI WATCH monitors three channels simultaneously: emergency channel 16, memory channel 00, and a channel of your choice. DUAL WATCH and TRI WATCH are great conveniences. You needn't flip back and forth between channels. All you need to do is set the frequencies to be monitored. When one or more signals are received on any of the monitored frequencies, they will be heard over the speaker.
Scan functions
IC-M11 has three scan functions. The DIAL SCAN scans all U.S.A. or International marine channels, except those you lock out. The MEMORY SCAN scans all the memory channels you've written. The WEATHER CHANNEL SCAN scans all weather channels. Using these three functions, you can scan any combination of frequencies hands free. IC-M11 has been designed for convenient scan operations. There are few buttons to push, eliminating the guess work needed to operate other marine transceivers.
IC-M11 is weather resistant, making it perfect for marine operations. You can be assured that splashing water on the case will not affect IC-M11's circuitry and mechanism. Both front and back panel are made of strong metal frame. You'll be satisfied with this rugged little marine transceiver.
IC-M11 is compact and lightweight - when fitted with the battery pack and the flexible antenna, it weighs only 675 grams (about 1-1/2 lbs.). Carry IC-M11 wherever you go! |
|
Detailed Specifications
GENERAL
- Mode: 16K0G3E
- Antenna Impedance: 50 ohms
- Battery Pack: Icom Battery Pack (see below)
- Operating Temperature Range: -20° C-+60° C
- Frequency Stability: +/-0.0005%
- Dimensions (with CM-7G): 65mm(W)x170mm(H)x35mm(D), (projections not included)
- Weight: 675g (including battery pack and flexible antenna)
TRANSMITTER
- Frequency Range: 156-157.5 MHz
- Output Power (with CM-7G): High 6 W, Low 1 W
- Maximum Permissible deviation: +/-5kHz
- Spurious Emissions: 60 dB
- Hum and Noise Ratio: 40 dB
RECEIVER
- Frequency Range: 156-163 MHz
- Sensitivity: 0.35 µV for 12 dB SINAD
- Audio Output Power: 500 M W with an 8 ohms load
- Intermediate Frequencies: 1st 23.1 MHz, 2nd 455 kHz
- Adjacent Channel Selectivity: 60 dB
- Modulation Acceptance: +/-7.5 kHz
- Spurious Response Rejection: 60 dB
IC-M11 Options
- BC-35 AC Battery Charger
- CM-60A Multi-Charger
- CM-1 Cigarette Lighter Cable
- DM-2 DC-DC Converter
- CM-9L Speaker-Microphone
- EM-46L Speaker-Microphone
- CP-10 Battery Separation Cable
- HS-51 Headset
- MB-22 Alligator Clip
- MB-24 Mounting Bracket (Hanger-type)
- MB-25 Mounting Bracket (Wall-type)
BATTERY PACKS
- CM-2G:
- Height: 39mm
- Charging period with Battery charger
CM-35: 1.5 hrs.; CM-60A: 5 hrs.; CM-25U: N/A; CM-16: N/A; CM-1, CM-28, DM-2: N/A; Ext. DC Power Source: N/A
- Remarks: Small size, Rapid charging
- CM-3G
- Height: 39mm
- Charging period with Battery charger
CM-35: 15 hrs.; CM-60A: *1 3.5 hrs.; CM-25U:15; CM-16: N/A; CM-1, CM-28, DM-2: 15; Ext. DC Power Source: 15
- Remarks: Small size, Variety of chargers
- CM-4G
- Height: 49mm
- Charging period with Battery charger
CM-35: *2 15 hrs.; CM-60A: *2 5 hrs.; CM-25U: N/A; CM-16: N/A; CM-1, CM-28, DM-2: N/A; Ext. DC Power Source: N/A
- Remarks: AA size x 6 pcs. with battery case
- CM-5G
- Height: 60mm
- Charging period with Battery charger
- CM-35: 1.5 hrs.; CM-60A: 5 hrs.; CM-25U: N/A; CM-16: N/A; CM-1, CM-28, DM-2: N/A; Ext. DC Power Source: N/A
- Remarks: Long Life, Rapid charging
- CM-5AG
- Height: 80mm
- Charging period with Battery charger
CM-35: 1.5 hrs.; CM-60A: 5 hrs.; CM-25U: N/A; CM-16: 15; CM-1, CM-28, DM-2: 15; Ext. DC Power Source: 15
- Remarks: Long Life, Rapid charging, Variety of chargers
- CM-7G
- Height: 80mm
- Charging period with Battery charger
CM-35: 1.5 hrs.; CM-60A: 5 hrs.; CM-25U: N/A; CM-16: 15; CM-1, CM-28, DM-2: 15; Ext. DC Power Source: 15
- Remarks: Long Life, Rapid charging, For HIGH output power
- CM-8G
- Height: 80mm
- Charging period with Battery charger
CM-35: 3 hrs.; CM-60A: 9.5 hrs.; CM-25U: N/A; CM-16: 15; CM-1, CM-28, DM-2: 15; Ext. DC Power Source: 15
- Remarks: Very long Life, Rapid charging
- CM-12G
- Height: 80mm
- Charging period with Battery charger
CM-35: N/A; CM-60A: N/A; CM-25U: N/A; CM-16: N/A; CM-1, CM-28, DM-2: N/A; Ext. DC Power Source: N/A
- Remarks: AA size x 12 pcs. with battery case, For HIGH output power
- CM-96
- Height: 80mm
- Charging period with Battery charger
CM-35: 3 hrs.; CM-60A: 11 hrs.; CM-25U: N/A; CM-16U: 15 hrs.; CM-1, CM-28, DM-2: 15 hrs.
- Remarks: Super long life, Variety of chargers
*1 DO NOT charge the batteries more than 48 hours.
*2 DO NOT charge zinc or alkaline batteries. Only replaceable NiCd batteries can be charged. |
|
|
|
|