Icom Canada
Icom Canada - Home Icom Canada - Contact Us Icom Canada - Site Map
Icom Canada - Avionics Icom Canada - Avionics

IC-746 + IC-PW1 Control Software Interconnection

1) Make sure the CT-17 is powered up. Connect the CT-17 output 1 to IC-746, and output 2 to IC-PW1.
2) Power up the IC-746 and set up the CI-V communication per the IC-PW1 manual. The CI-V set up will vary between the early and the latest IC-PW1 units.

Power on the IC-746 and the IC-PW1. The IC-PW1 should now automatically select the band the IC-746 is set to.


Now start the software, and set the software com port setting to the port you have the CT-17 connected to. The software should recognize the IC-746 and show the exact frequency on the computer screen the IC-746 is tuned to.

5) As you change bands on either the IC-746 or the software, the IC-PW1 will follow that band change. If you change bands on the software, both the IC-746 and the IC-PW1 will follow that band change.
IC-746 + IC-PW1
Home | Products | Dealer List | News | About Us | Career | Warranty | Services | Archive | Contact Us | Authorised Dealer | Site Map
Copyright © Icom Canada